Xbox 360 XCLAMP Repair Kit - 3 Red Light X-Clamp Fix w/ 3.5g Arctic Silver 5 & Opening Unlock Toolkit
Exclusively from 3RedLightFix and/or our direct fulfillment by Amazon option! Authorized Arctic Silver Reseller! Are you experiencing the dreaded “3 Red Light Error” that is a result of your XBOX 360 overheating? Now you can fix this problem yourself with our complete Xbox 360 X-Clamp repair kit. Plus, you will not have to waste gas or valuable time running all over town trying to find the correct parts. The most complete repair kit in the world and the only kit available that includes top quality hardware, instructions, 3.5g Arctic Silver 5 thermal compound, Official Xbox 360 Unlock tool with T8/T10 torx keys, CPU cleaner/purifier and free access to our X-Clamp repair forum. We have spent many hours developing the most complete instruction guide on the internet. Personally authored and very easy to follow! Our detailed instructions will show you how to easily fix the dreaded “3 Red Light of Death” error. Each kit contains all of the correctly fitted parts that are needed to fix your XBOX 360! You will receive enough hardware to fix BOTH core processors (CPU and GPU)! Each repair kit includes the following: 8 exact fit screws, 16 exact fit nylon washers,
16 exact fit steel/zinc plated washers,
3.5g Arctic Silver 5 thermal paste, Personally authored instruction guide (with pictures), CPU cleaner/purifier and official Xbox 360 opening tool with T8/T10 torx keys!
User Ratings and Reviews
5 Stars Fixed my “no video” problem.
My X-Box 360 showed green lights but “no video” output. No red lights ever appeared for me. After installing the X-clamp replacement kit my “no video” problem was solved.
The kit comes with everything you need to do a perfect job. I did not use any washers on the back side of the motherboard since the screw heads do not touch any motherboard traces, plus I gained clearance underneath so the motherboard sits flat and all the connectors line up without any flexing of the motherboard.
Get this kit and do not install the washers on the back of the motherboard and you will have a perfect fit and fix.
3 Stars Works well, but longevity could be an issue
SYMPTOMS: I was having pre-RROD issues with my 3.5yr old 1st gen XBOX 360. I have never seen an RROD on my console, but my unit started losing colors (from what was originally 24bit color to what looked like around 4bit color) making most games unplayable. Apparently the X-Clamp that holds the heat sink to the GPU on the XBOX 360 motherboard is too tight and causes the board to flex under the GPU. After many heating and cooling cycles some of the balls on the GPU’s BGA package can start to pull away from the flexed board. In my case I apparently started losing some of my Red, Green, and Blue output balls, but not enough Power and GND input balls to trigger a GPU failure and a RROD. Another symptom I was experiencing was that every few power cycles on the 360 I would have a solid black display with working audio, but no video. . . and again no error lights.
RESULTS: My XBOX 360 is now working as good as new thanks to this repair kit! The product did work as advertised, so I am giving it a positive review. However read on if you would like to hear about a new problem that this kit introduces that might only delay the need to use a superior X-Clamp replacement kit.
CONCERN #1: There are no detailed specs listed in this product description so you have no way of knowing how long the screws are until after you receive this kit. I was very disappointed when I received my kit because I realized that the screws are too short to protrude through the XBOX 360’s metal shield case on the bottom of the motherboard. Instead this fix keeps the large M5 screw heads inside the metal case between the motherboard and the metal case. With this setup my motherboard did NOT fit correctly back into the XBOX 360. The M5 screw heads are too large and force the 360’s motherboard to rest a few millimeters above where it should. The only way to get it to fit with all connectors around the edge of the board fully exposed was to tighten down the original torx screws on the outside of the metal case which caused the motherboard to bend at all 4 sides. My 360 motherboard is now bowed such that all the edges are lower than the CPU and GPU in the center of the board where the kit M5 screws push the center of the motherboard upward. Therefore while this kit allows you to remove the more significant X-Clamp bend at the GPU, it introduces an entirely new motherboard bend across the whole motherboard. The new bend amount is likely less than the original bend, but I am concerned that the problem could happen again eventually after more heating and cooling cycles. I feel like I have not solved the problem, but only delayed it.
SOLUTION TO CONCERN #1: Do not buy this kit. If you live in the US (where the metric system is an afterthought) then I also don’t recommend running around town trying to buy the kit components yourself as M5 cheesehead screws and M5 nylon washers can be very difficult to find, even at specialty hardware stores I visited (in addition to the big brand national chains). Instead use the kits and the install methods described on either of the following sites that use longer M5 screws that will allow your XBOX 360 motherboard to lay completely flat in its case without any bending. The downside of using one of these other kits is that the 8 torx screw holes in the metal case are too small to fit the wider M5 screws so you do need to use a drill to widen 8 of the existing holes in the case. . .this is not tough as long as you own a drill.
Llama.com: [...]
Team hybrid (adds an additional precision sanding step): [...]
CONCERN #2: [...]
TIP: While you have your XBOX 360 open I would suggest installing this Whisper 360 fan from Talismoon that is quieter then the original 360 fan and improves the airflow. I have been using this fan since day 1 of my 360’s 3.5yrs and I think its part of the reason why I have never seen a full RROD.
http://www.amazon.com/Whisper-Fan-360-Xbox/dp/B000H1V56U/ref=sr_1_1?ie=UTF8&s=videogames&qid=1249573579&sr=8-1
NOTE: I do not recommend the newer Whisper Max fan by Talismoon as it sounds like a jet engine while in Max mode.
5 Stars 3 Red Rings of Death Xbox 360
The perfect Kit to buy if you are good in fixing things and if your Xbox 360 is not under warranty and you are able to open your xbox 360 it can be tricky,once open just do what its meant for and this kit will have your system up and running with no Red Ring of Death and since you already open the xbox get an extra fan to install it for extra cooling you would find them in the internet not so expensive but worth putting in as long as you keep your system a little cooler it’s worth putting in,Other than that this kit worked for me and now my xbox 360 is up and running in just about an hour or 2 I’m back in my games,but remember not to rush repairs the longer you take to get the job done right the better you do. good luck-Just Buy it- Everything is Ready in package including openning tools for the Xbox 360.
Filed under: Xbox 360 Video Games